|
|
Post by 1badazz84 on Mar 22, 2008 20:03:04 GMT -5
JUST JOIN I HAVE A PROBLEM I JUST BOUGHT A EDELBROCK CARB 1404 FOR A STOCK INTAKE FOR A 305V8. IM GETTING GAS UP TO THE CARB BUT NO GAS IS SPRAYING OUT TO START I PUT A MR GASKET ADAPTERON IT SO THE CARB CAN OPEN ALL THE WAY. OR SHOULD JUST BUY EDELBROCK PERFORMER INTAKE
|
|
|
|
Post by Pontiac1976 on Mar 27, 2008 17:23:05 GMT -5
OK you would like the up grade of a lighter EDELBROCK PERFORMER INTAKE.
But it's up to you, and what your want out of the truck and motor.
Now back to your gas problem first I really like EDELBROCK intakes and a lot of there stuff But do not like the carbs at all!. A 4BBL stock or 4BBL Holley carb I prefer them.
I need to know you got gas to the line at the carb & the bowl or just the line.
If you have not enough fuel in the bowl it may not get gas to the cylinder. if this was a new cab it should be at a close proper level but it may not if it was used. So I would check the bowl to see if the fuel is at the right hight. Other thing fuel pump not not putting out a proper PSI.
|
|
|
|
Post by blazerguy85 on Mar 28, 2008 21:30:32 GMT -5
i had the same problem but like pontiac1976 said my fuel pump was shot it had enough pressure to get up to the fuel filter but not past it. good luck man
|
|
|
|
Post by 1badazz84 on Jul 26, 2008 17:55:10 GMT -5
thats 4 the help what had happen is that the guy i brought the carb from didnt tell me it was dirty so i took apart i clean it inside & out now it works goods.
|
|
|
|
Post by Pontiac1976 on Jul 28, 2008 16:05:27 GMT -5
That good news, glad your got it running.
|
|
