|
Post by texasredneck on Mar 21, 2009 15:22:02 GMT -5
hey y'all, i'm about to get my truck painted but i need to drill some holes first in the body. the holes are for the attachment of the chrome trim moldings on the sides. can anybody tell me: the truckbed (a longbed!!!) behind the wheelwell: - from the wheelwell to the taillight-the lower chrome molding is attached with one molding screw under the taillight and with two molding clips(one is behind the wheelwell). to make it easy i would like you to take measurements the following way: from the upper side (edge)of the upper chrome molding(A) to the center of the lower chrome molding(see picture)(B).measure it just behind the wheelwell(C) and on the edge of the bed under the taillight where the molding screw is(D). ok, that's one thing done, now if possible one more. same procedure , frontfender next to the door (A) and the wheel well (B) (see pic) upper edge upper molding(C) to center of lower molding(D). thanks for helping out fellow truck lovers
|
|