83
Truck Lover
Posts: 41
|
Post by 83 on Nov 11, 2007 0:07:53 GMT -5
this is dad's 78 silverado he's putting a 350 lt1 in here.let me know what you think.   |
|
|
|
Post by Pontiac1976 on Nov 11, 2007 15:01:19 GMT -5
Kool do a bit of a right up on the in stall any tips or problem area's that need Attention, or little changes for the set up so others will know & a few pic's install. 
|
|
83
Truck Lover
Posts: 41
|
Post by 83 on Nov 12, 2007 0:28:30 GMT -5
well he started with a 95 iron headed lt1 from a caprice he got the complete engine/wire harness and ecm for $200 bucks,he tore it all down and rebuilt it.then he got a great deal on a complete lt4 valve train.lt4 hot cam push rods liftters springs and crane gold race roller rockers.then he got a set of f-body aluminum heads.he used a fuel tank from 87 chevy pick-up and replaced the stock pump with one from a 85-92 f-body with a tpi other than that only problem we had is the vats system.but we solved that.
|
|
