|
Post by 74chevy on Nov 25, 2007 17:02:10 GMT -5
hey my wiring is a little messed up some one put a junky a$$ f@#d solenoid on the fire wall and there is not a wire going to the starter solenoid it is crazy
|
|
|
Post by Pontiac1976 on Nov 27, 2007 13:22:08 GMT -5
Well they mostly did not want to take the starter off to fix it or they want to make it easier reach the solenoid for timing bumming. Who know. But it should not be to hard fix that in time when your ready. You will not know till you start working on it or you have some starter problems.
|
|
|
Post by 74chevy on Nov 29, 2007 17:04:47 GMT -5
YEA I WOULD LIKE IT WIRED UP LIKE WHEN IT WAS NEW
|
|
russ
Fresh Meat
Posts: 5
|
Post by russ on Feb 10, 2009 1:00:28 GMT -5
I'd trace that black wire without the yellow connector to see where it goes to. The one with the yellow connector should go to the switch if you want to figure it out that way. Those wires are way to small to be for the starter. Or you could disconnect the black wire without the yellow and see what doesn't work anymore.
|
|