|
|
Post by chevy305c10 on Jul 26, 2007 3:20:15 GMT -5
ok.. so... first off, its got a new bat, distributor, cap, coil, alt, wires, plugs, carb and starter, all in the last 3 months. it cranks but it doesnt turn over. its wasnt getting spark, power would go into the distributer but none would come out. so i went and checked out the net and found out it was the ESC. so i by-passed it as they said to on the forums. it gets spark but its very weak and still wont turn over. i seriously need some help. ive tried everything and looked every where. any and all know how would be great, before i rip all the electric out and convert it to pre-ESC. ;D thank you.
oh ya, its an '84 c10 silveraudo, 305h. carb
|
|
|
|
Post by chevy305c10 on Jul 26, 2007 3:28:12 GMT -5
forgot to say, the timimg is TDC on the dot, it ran fine for a while, but just cut out... would take a while to start up. then finally the last time it quit.... it never cranked again lol. been working on it everyday after work for the last 3 week. its so funny cuz its so simple. i know its gonna be something so stupid that i keep looking over. lol. but a quick reply would be great, thanks again.
|
|
|
|
Post by Pontiac1976 on Jul 26, 2007 9:25:09 GMT -5
Two thing I have to asks is is the batt putting out 12 volts since you have not been driving it & working on it.
Have you taken off the cap& coil to check the "control module,capacitor, maybe the pick up but you have to take out the dist take it apart to replace it."To check the Electrical using a Multi Meter"
|
|
83
Truck Lover
Posts: 41
|
Post by 83 on Aug 6, 2007 1:02:31 GMT -5
timing chain when they stretch or break it won't start
|
|
|
|
Post by Pontiac1976 on Aug 6, 2007 12:46:21 GMT -5
Is the starter gear coming all the way out to engage the flywheel.
|
|
|
|
Post by 1badazz84 on Sept 20, 2008 18:11:27 GMT -5
i thinck you should check the C.M.S. i had the same problem when i had a suberben ran fine then stop running put a C.M.S. STARTED UP JUST FIND
|
|
