Post by Pontiac1976 on May 3, 2007 8:06:09 GMT -5
Here just helpful table check to see if it gone
I got this list ( forget now where) for a quick table showing the gauge reading based on the resistance sent to the signal lead from the oil pressure sensor. It also shows the reading for an open (unplugged) and a short (grounded) conditions.
(If the shunt resistor burned out on the gauge.)
Quick Table Resistance oil pressure/ sensor Gauge
I got this list ( forget now where) for a quick table showing the gauge reading based on the resistance sent to the signal lead from the oil pressure sensor. It also shows the reading for an open (unplugged) and a short (grounded) conditions.
(If the shunt resistor burned out on the gauge.)
OIL PRESSURE SENSOR/GAUGE READING
Signal Wire ---- | | ----- Gauge Reading (PSI)
Open ---- | | ----- Past 60
Short ---- | | ----- 0
35 ohms ---- | | ----- 15
50 ohms ---- | | ----- 30
75 ohms ---- | | ----- 45
100 ohms ---- | | ----- 60
35 ohms ---- | | ----- 15
50 ohms ---- | | ----- 30
75 ohms ---- | | ----- 45
100 ohms ---- | | ----- 60
