|
Blinker
Aug 22, 2005 16:27:12 GMT -5
Post by ajpletcher on Aug 22, 2005 16:27:12 GMT -5
I'm back with the 77 1/2 ton. well my blinkers stopped working. I started to trouble shoot, I'm now puzzled. My hazard lights work, so I took the canister and plugged it into were the blinker canister was, still they don't work. So i took my light tester and i was able to get power from the cam on the steering wheel. Any Ideas?
|
|
|
Blinker
Aug 28, 2005 7:00:16 GMT -5
Post by Pontiac1976 on Aug 28, 2005 7:00:16 GMT -5
First is either signal staying lite . Did you check the fuses . go to the back tail light check the wires fallow the wires to the front see the colors you might have popped a wire or ground and do the same at the front lights all so check to see how far down the line power stops that should be around there . Now is the blinker just not working in truck . hope this help a little more to track down problem.
|
|
|
Blinker
Aug 28, 2005 11:46:43 GMT -5
Post by Bent on Aug 28, 2005 11:46:43 GMT -5
Or you could just add a couple quarts of SAE 10w 10 blinker fluid and see how she works. Also and make sure not to go to any lighter weight or it will blink too fast lol.
|
|
|
Blinker
Aug 29, 2005 13:55:45 GMT -5
Post by ajpletcher on Aug 29, 2005 13:55:45 GMT -5
fixed thanks
It turns out the person who owned the vechicle before me, rewired the electrical and ran the power wire thru his old amp wires witch i removed unknowly affecting the blinkers. I just put power back to the blinkers and everything was good.
|
|
|
Blinker
Sept 4, 2005 9:30:04 GMT -5
Post by Pontiac1976 on Sept 4, 2005 9:30:04 GMT -5
Glad it's working
|
|
|
Blinker
Sept 4, 2005 18:40:15 GMT -5
Post by Bent on Sept 4, 2005 18:40:15 GMT -5
Are you sure that you didn't buy Don's old truck? Or did it maybe belong too bowtie? ;D
|
|
|
Blinker
Sept 4, 2005 21:40:48 GMT -5
Post by Pontiac1976 on Sept 4, 2005 21:40:48 GMT -5
lol oh is that a double shot
|
|
|
Blinker
Sept 5, 2005 23:28:58 GMT -5
Post by 19_Chevelle_69 on Sept 5, 2005 23:28:58 GMT -5
C'mon now Bent, I found all those Mar-ette connectors under the dash when I BOUGHT the truck. I went in there and re-wired everything properly....LOL Good shot though....
|
|
|
Blinker
Sept 6, 2005 0:32:55 GMT -5
Post by Bent on Sept 6, 2005 0:32:55 GMT -5
Just kiddin Don. I use duct tape on my connections LOL!
|
|