|
|
Post by phils85c10 on May 12, 2007 15:38:27 GMT -5
I am going to drop my 85 c10 4inches in the front and 6 in rear. What all do i need in the front to drop it 4 inches?
thanks, phil
|
|
|
|
Post by 77chevyman on May 12, 2007 19:38:52 GMT -5
You need a 2 inch coil and a 2 inch spindle. have any questions just ask. The rear u will need a flip kit and lowering shackles.
|
|
|
|
Post by phils85c10 on May 13, 2007 9:56:55 GMT -5
How level do you think the truck will be if i lower it this way?
|
|
|
|
Post by 77chevyman on May 13, 2007 20:24:48 GMT -5
It will level it out pretty much even. It also depends on ur tire sizes. I try to run the same size tires. I think you have seen mine I have different size tires in the rear ( way to tall ). Mine sits level when i have the close to the same size tires all the way around.
|
|
83
Truck Lover
Posts: 41
|
Post by 83 on May 15, 2007 1:06:27 GMT -5
also if your useing your stock 15inch wheels you will need a 1/2 spacer in the front or else the tie rod will rub!!
|
|
|
|
Post by 77chevyman on May 15, 2007 8:41:56 GMT -5
I dont have that problem. I am dropped 5 inchs in the front. Been dropped 6 years.
|
|
