|
|
Post by dugen5000 on Jan 1, 2006 17:06:47 GMT -5
I am trying to find a place to get lift springs or anything but a body lift to lift the front of my 1987 lwb 2WD 1/2 ton. Also I don't know if it is possible to put in spring spacers in an 87. I see them listed for 88 and up. Also if 3/4 ton or 1 ton springs would work to lift or just level the truck . Any help would be great thanks.
|
|
|
|
Post by 19_Chevelle_69 on Jan 3, 2006 17:54:15 GMT -5
I haven't seen lift springs for a 2wd truck, but you could use the twist-in spacers to help raise it a little.
Why not lower the rear and with some longer shackles instead?
|
|
|
|
Post by dugen5000 on Jan 27, 2006 15:03:47 GMT -5
|
|
|
|
Post by billyjack on Jan 28, 2006 11:15:21 GMT -5
This looks "promising" (i'm looking to level my truck's stance). Why do they make you get rear blocks or leaf springs? Is that going to lift the rear 2" also? Is that what you're wanting to do, 2" all around?
I thought the only choice was to drop the rear 2" with shackles or something... either way is fine by me, my truck has like 5 ft of air between the fenders and tires... (grandpa had 215/75's on the pickup and they look like car tires to me.)
|
|
|
|
Post by dugen5000 on Jan 28, 2006 17:24:01 GMT -5
I am not trying to do a 2'' lift all the way around just the front springs.i found a set of just the front springs on e-bay i my buy them or just call the company and tell them i only want the springs
|
|
|
|
Post by rdf4x4 on Feb 5, 2006 19:46:01 GMT -5
Have you check your loc. spring shop. Or find a machine shop that might build them.
|
|
