|
Post by Bent on Sept 13, 2005 21:13:50 GMT -5
I went and took off the passenger spring plate and I am stuck wondering how I am going to get the spring back on the pad... If I took off the pass side plate then the axle would be unevenand the pads wouldn't line up on the pads right? If i took off the other side and supported the axle on jackstands it would theoretically make it level? And I would like to know if I supported the axle on jackstands will the pinion be ok still connected to the driveshaft?
|
|
|
Post by JAMin747 on Sept 13, 2005 21:26:05 GMT -5
from what ur saying ur going to take the springs off of the axle and are worried about how they are going to line back up?
|
|