|
Post by bigdog44 on Oct 2, 2010 14:36:35 GMT -5
Guys Im trying to install an LT1 from a 97 acamaro Z28 into my carburated 82 blazer 2wheel drive. I have the complete engine and ecu/epu but will be getting the stock harness soon. My truck came stock with a 700r4 and is in good condition. Now how do I go about hooking up all the wires to my current harness. power/ground?
|
|
|
Post by Pontiac1976 on Oct 3, 2010 15:30:52 GMT -5
As I have not done this all I can say I hope that a few on here will chime in. But what I can say is that is a good start. I would get a wiring set up for that 97 car and a wiring set up for the truck. most of it should be pretty easy to do for the basic stuff that both car and truck have. You will need all the sensor to be added to the truck motor. If your using the truck fuse box with the harness.You may need to upgrade your fuse box like a 87 with as many option in it ( that where on the truck )so it gives you the most hook ups . because the fuse box say it had the option does not mean the connection has the fuse ready plug and play because most of them will be ready to plug in need to re work the box if the option way listed but never set up to work.
|
|