|
Post by jcissell on Aug 25, 2009 21:00:35 GMT -5
This is my truck. It started life as a 1984 GMC Sierra 1500. I tossed the 1/2 ton nuts for a 14 bolt full float rear axle with locker. Up front the matching Dana 44. Both have 5.13 gearing. It has a Warn 12000lb. winch in the front bumper. Got the bumper and winch combo for $300 and works great. The motor is a modified GM Goodwrench 350. I ordered it as a 4 bolt main 350 hp 350. I upgraded the cam to .501 lift, matching valve springs, gear drive, magnum roller rockers, magnum pushrods. Heads are 64cc with 2.02/1.60 stainless valves. It has flat top pistons. The intake is an edelbrock with and edelbrock 750cfm carb. Exhaust is newer than in the pics. Recent is 2 1/2 inch I.D pipes coming from flowtech II headers flowing into 6 inch semi-stacks mounted in the bed. Tranny is a built TH350 and NP208 transfer case.(The Weakest link in the truck i think). Sorry for the book i just wrote. lol. Will be glad to answer any other questions about the truck. Attachments:
|
|
|
Post by 74chevy on Sept 1, 2009 17:46:25 GMT -5
lol talking about needing a bath nice truck
|
|
snow
Truck Lover
Posts: 21
|
Post by snow on Sept 5, 2009 9:58:16 GMT -5
Nice, what lift / tires setup you running?
|
|
|
Post by jcissell on Sept 6, 2009 13:16:04 GMT -5
6inch suspension lift, 3 inch body lift and a little homemade work. lol. have a 12 in suspension lift that needs to be installed. Thinking about swapping in 2.5 ton rokwells. The tires are mickey thompson baja. 39.50X18.50X16.50. They are sand tires, but perform great on th road,snow and hard dirt. Decent in md due to the wide floating capability. They were free and brand new so i cant complain.
|
|