|
|
Post by customdeluxe on Dec 19, 2005 16:03:36 GMT -5
Hey guys My truck does not have power brakes and I was wondering if all I had to have was a booster to convert it?
|
|
|
|
Post by 19_Chevelle_69 on Dec 19, 2005 18:36:01 GMT -5
You need a booster, a master cylinder, and you have to move the brake pedal pushrod to the lower hole in the pedal arm.
|
|
|
|
Post by customdeluxe on Dec 19, 2005 20:34:45 GMT -5
thanks alot!
|
|
|
|
Post by Bent on Dec 19, 2005 21:20:40 GMT -5
[glow=limegreen,2,300]That's it? Wow that is alot easier than i thought  [/glow] |
|
|
|
Post by 19_Chevelle_69 on Dec 20, 2005 11:02:55 GMT -5
I haven't done this on these trucks, but that's all that is involved when doing it on my Chevelle...  (There may or may not be a lower hole in the pedal arm, I didn't look at my truck to verify.) |
|
[/glow]
