|
Post by 85 silverado on Oct 31, 2004 23:11:51 GMT -5
I have an 85 1/2 ton with the np208 t-case. when in 4wd i get some fairly loud clanking noises from the front end. Upon inspection my front drive shaft where the yoke slips on has some play in it. I pulled it off replaced the front u-joint and when i was looking at the yoke i noticed it was balanced and had a key way in the threads but the splines on the driveshaft had no keyway. Without the keyway on the driveshaft the balance is off as soon as you put the yoke back on cuz i didn't mark it.
My question is : What is the difference in yokes between the different transfer cases? Could the previous owner put the wrong yoke on the driveshaft?
|
|