|
line up
Dec 26, 2007 11:32:12 GMT -5
Post by texasredneck on Dec 26, 2007 11:32:12 GMT -5
hi everybody, i have an intresting question about lining up. okay, the cab is on the chassis, the radiator support also( 1980 gmc sierra grande).now i need to mount the front fenders, de hood and the doors, where do i start? :-/is there a rule to follow the get all these parts lined out as nicely as possible?any advice would be great !! thank you.
|
|
|
line up
Dec 26, 2007 20:05:17 GMT -5
Post by Pontiac1976 on Dec 26, 2007 20:05:17 GMT -5
Well I would start with putting on the doors makes putting them on easier line up as good as you can. So the door opens closes good then snug them bolts down. Then the fenders and last the hood, tighten them both up tight, them enough but leave the fender lose enough to adjust them so the door opens with out jamming or rubbing the edge then adjust the hood. You might need some of the shims for the fenders to try to line up body lines . I'm sure that a few other might have a few tip or tricks maybe bigtendude has one or two.
|
|