Post by Pontiac1976 on May 12, 2020 7:41:16 GMT -5
**ATT: Most DIY's I have herd or seen or listen to people say just pull it straight out. THIS IS NOT THE SAFE WAY TO DO IT. THIS MAY WORK BUT YOU CAN BREAK STALK LOCKING TAB OR SNAP THE TURN SIGNAL SWITCH IN THE STEERING COLUMN.
How to Replace Turn Signal Wiper Stalk & Cruise Switch all GM 84 - up to the next style change starts.
The trick is to press the stalk in ward holding then turn counter clock then pull out. easy (do not press to hard or put to much pressure turns)just till stops movement. Should be like 1,2,3 it out to. To replace just do the revers. But if you have Cruise option. Then you will have to go under the dash to unplug the black like long horse shoe plug. Then tie fishing line or mechanic wire, to wire end connection plug. you will have to snaking the wire up the column till it pop out. Then tie fishing line or mechanic wire, to the new wire end connection plug. This will be a little tricky re-snake down the take your time pull to hard it will come.
The trick is to press the stalk in ward holding then turn counter clock then pull out. easy (do not press to hard or put to much pressure turns)just till stops movement. Should be like 1,2,3 it out to. To replace just do the revers. But if you have Cruise option. Then you will have to go under the dash to unplug the black like long horse shoe plug. Then tie fishing line or mechanic wire, to wire end connection plug. you will have to snaking the wire up the column till it pop out. Then tie fishing line or mechanic wire, to the new wire end connection plug. This will be a little tricky re-snake down the take your time pull to hard it will come.
