rob
Fresh Meat
Posts: 3 
|
Post by rob on Dec 7, 2015 17:14:58 GMT -5
I did a body swap recently put a 73 crew cab on a 77 single cab long bed to get the crew cab short bed to hold my family and still have a truck I don't know how to change from regular to itermidant wipers the old single cab had reg crew has itermidant and the harness that plugs into the cab I can't find a diagram my running lights stay on all the time and head lights won't turn on not sure where to start
|
|
|
|
Post by Pontiac1976 on Dec 8, 2015 6:08:08 GMT -5
Kool I see if I can help you I have no time to try look for the info right now. Do you have the motor and switch module for it.
|
|
rob
Fresh Meat
Posts: 3
|
Post by rob on Dec 8, 2015 13:53:48 GMT -5
I have everything was a running truck and a good crew cab I don't think the wires plug into the right spot the fuse boxes are different size and shape I'll keep searching
|
|
rob
Fresh Meat
Posts: 3
|
Post by rob on Dec 8, 2015 22:04:06 GMT -5
Got the lights figured out and everything workin fine now I just need to find out how to hook up my wipers I have 77 regular wiper plug ends intermidant wiper system on the cab can I cut off the plugs ends and splice in the ones they fit
|
|
|
|
Post by Pontiac1976 on Dec 8, 2015 23:30:25 GMT -5
If you have both fuses boxes you could just swap them. Then hook up the right wiper motor & wiper switch and module. And then you should be good to go.
|
|
|
|
Post by Pontiac1976 on Dec 13, 2015 17:51:37 GMT -5
Well I can't find the 73 intermittent wipers of hand but this might help you a little type this in Google (((( 73 GM truck intermittent wiper wiring diagram )))).
|
|
