carb and intake dilemma

[pulvi]

i recently pulled my 350 out of my 83 was going to rebuild but then came acroos a rebuilt 350 or 355 now the new engine has an elelbrock 2101 manifolod on it but i i have a 2701 that i can put on . know i will be puting in a accel hei super coil the engine has an rv cam along with a double roller timing set . that being said what would be the best intake for what i have i am also going to buy a new carb havent decided yet on what and i also have he adapter plater for the 2701 so i can use either type of carb any suggestion or advice would be great

[Pontiac1976]

Both of them are duel plain set ups . The 2701 is pretty much the same as the 2101. [glow=red,2,300]But the 2701 is [/glow]:For Chevy 262-400 engines, Performer EPS and Performer EPS Vortec dual-plane manifolds are designed to deliver superior performance with Edelbrock square-bore Performer or Thunder Series AVS carburetors. The runner design is "tuned" for peak torque around 3500 RPM on a Chevy 350. Dyno tests of a Chevy 350 showed increases of 5 HP and 9 ft/lbs TQ over Edelbrock's 350-2101. From 3000-4500 RPM, gains averaged 5 ft/lbs TQ for more performance where it's needed most.

350-2703 combines modern runner design with a front-mount oil fill tube for those who want the vintage valve cover look with no breathers. Available in a natural, black, or EnduraShine™ finish.
EnduraShine™ Edelbrock's 3-step finishing process features a base coat, metal coat, and clear coat... the brilliance of chrome without its cost or maintenance.

Intake Manifold Specs
RPM Range: Idle-5500 RPM
Non-EGR applications
4-bbl square-bore carb flange
IMCA-approved
Click More Info links below for installation info

[glow=red,2,300]The 2101 is :[/glow] Performer Intake Manifolds have a patented runner design that delivers outstanding performance, crisp throttle response, and improved torque over a wide RPM range.

Edelbrock Performer Intake Manifolds for Chevy - GM - Features

Dual plane low-rise design with 180° firing order
Idle-5500 RPM for most manifolds listed
4-barrel square or spread bore carb flange as applicable
Available in As-Cast, Polished or EnduraShine finishes
Most are 50-state legal when used with correct carburetor in correct application


JEGS Easy Kits are designed by JEGS professionals so you get all the parts you need. Each kit includes:
Performer Intake Manifold
Intake Bolts & Gaskets
Carburetor Studs & Gaskets
Tube of Blue Gasket Sealer

Really up to you what other part do you have or are you going with.
I hope the info help you your parts should be pretty good so far.