|
Post by Pontiac1976 on Feb 11, 2018 13:20:17 GMT -5
Tip:The small things get you some times drive you crazy. Two part Drive Shafts front rear if you had to change u-joints alway make sure that you clock your joints so that the match if you took them apart. because a friend did not do this was going crazy with a groown noise. Happens to the best of us now and then.
|
|
|
Post by Pontiac1976 on Jun 14, 2020 11:40:07 GMT -5
Q: Should I grease the slip yoke before reassembly.
A: All drive shaft yokes should be greased.
Yes you should always grease the slip yoke after work before reassembly. With one of these. General Motors GM Fluid 19257121, or Valvoline SynPower Synthetic Automotive Grease - VV986, or any brand of your choice that has.. higher - quality lubricant contains PTFE Multipurpose grease, which is also non-melting.
|
|