|
Post by davidmgill on Jun 2, 2011 18:54:57 GMT -5
Hello
The modulator on the turbo 350 for my truck recently fell out and all the fluid leaked out.I noticed the retaining clip was gone,worse the tab on the tranny that the clip bolts to is broken. Any ideas on how to hold that modulator in place,could the clip be welded to the case,is the case aluminum,I don't want to pull the tranny to fix something simple like this.
Thank you Dave G
|
|
|
Post by Pontiac1976 on Jun 5, 2011 15:26:58 GMT -5
Yes the Trans is Alum. You might be able to weld it if a good welder looks at it and can do, it depends on how bad how the case is weathered. You might be able to JB Weld it if it not to bad re-drill & re-tape the hole good luck.
|
|