Wanted 87 exhaust

[cal]

:( I need an exhaust pipe right off the manifolds fr an 87 K-10 with a 305 automatic & 4wd. I've checked with all the local parts stores & haven't found one yet. I'd rather not go with headers. I'm hoping someone here can steer me in the right direction. Any help would be greatly appreciated. Thanks Cal


I'm a newbe & I'll write up some info in the new member

[Pontiac1976]

Hi first GM dealer. or a good muffler shop in your area.
A good after market replacement would be Walker pipes & mufflers.
Now it sound like you need the Y pipe for a factory set up.
Of 87 K-10 with a 305 automatic & 4wd

www.walkerexhaust.com/catalog/vehicletypescrn.asp

IE. To me this look like 1@ 40412 Y pipe, 2@ 31520 two gaskets, 1@ 35337u clamp 2-1/2" You may need or not need the stud kit for the exhaust manifolds and heat riser if it not working or it breaks when trying to get pipe off. Most times on pass side if your had it.
Now you can check this find a place this should be able to get this .
Most good mufflers shops should have no trouble at fixing it to factory spec. But you could need more pipes you should check the rest of it do it now all at one time. if you not to bad at stuff like this you can save by doing it your self. check speed shops,IE. pet boys or who ever in you area.